Posted by admin on June 26, 2009 · Leave a Comment
09/30143423 DC
BS EN ISO 11120. Gas cylinders. Refillable seamless steel tubes of water capacity between 150 l and 3000 l. Design construction and testing
AVAILABILITY: yes
FORMAT: 45 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN:
Filed under Gas cylinders, Pressure vessels · Tagged with Assembling, Calibration, Certificates of conformity, Chemical composition, Compositional tolerances, Compressed gases, Control samples, Dangerous materials, Design, Dimensional measurement, Environment (working), Formulae (mathematics), Gas cylinders, Hardness testing, Heat treatment, Hydraulic tests, Impact testing, Inspection, Liquefied gases, Marking, Mechanical properties of materials, Mechanical testing, Penetrant flaw detection, Performance testing, Pressure vessels, Quality assurance, Re-usable, Seamless pipes, Stainless steels, Surface defects, Tensile strength, Tensile testing, Thickness, Ultrasonic testing, Visual inspection (testing), Volume
Posted by admin on June 26, 2009 · Leave a Comment
BS EN ISO 16061:2008
Instrumentation for use in association with non-active surgical implants. General requirements
AVAILABILITY: yes
FORMAT: 28 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 65890 7
Filed under Implants for surgery, prosthetics and orthotics · Tagged with Austenitic steels, Chemical composition, Compositional tolerances, Design, Ferritic steels, Grades (quality), Implants (surgical), Inspection, Instructions for use, Martensitic steels, MATERIALS, Medical instruments, Packaging, Performance, Precipitation hardening, Production, Selection, Stainless steels, Sterilization (hygiene), Surgical equipment, Surgical instruments
Posted by admin on June 26, 2009 · Leave a Comment
BS 3655:1981+A1:2009
Recommendations for informative labelling of textile floor coverings
AVAILABILITY: yes
FORMAT: 8 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 65350 6
Filed under Textile floor coverings · Tagged with Care labelling, Carpets, Compositional tolerances, Dimensional tolerances, Floor coverings, Marking, Mats, Sampling methods, Sheet flooring, Textile floor coverings, Textiles
Posted by admin on June 26, 2009 · Leave a Comment
BS EN 573-3:2009
Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
AVAILABILITY: yes
FORMAT: 40 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 63982 1
Filed under Aluminium and aluminium alloys · Tagged with Aluminium, Aluminium alloys, Chemical composition, Compositional tolerances, Designations, Drawing (forming process), Extruding, Foil, Forging stock, Forgings, Ingots, Materials in contact with food, Pipes, Semi-finished products, Sheet materials, Strips, Wires, Wrought alloys
Posted by admin on June 26, 2009 · Leave a Comment
BS EN ISO 898-1:2009
Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
AVAILABILITY: yes
FORMAT: 64 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 57177 0
Filed under Bolts, screws, studs · Tagged with Alloy steels, Angles (geometry), Approval testing, Bolts, Chemical composition, Compositional tolerances, Decarburization, Designations, Dimensional changes, Dimensions, Elongation at fracture, External-thread fasteners, Fasteners, Hardness, Hardness testing, Impact testing, Marking, Mechanical properties of materials, Mechanical testing, Physical properties of materials, Proof loading, Screws (bolts), Specimen preparation, Steels, Studs (fasteners), Surface properties, Symbols, Temperature, Tempering, Tensile strength, Tensile testing, Test equipment, Test specimens, Testing conditions, Thread pitch, Unalloyed steels, Yield stress
Posted by admin on June 26, 2009 · Leave a Comment
BS 4449:2005+A2:2009
Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification
AVAILABILITY: yes
FORMAT: 34 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 64585 3
Filed under Steels for reinforcement of concrete · Tagged with Approval testing, Area, Area measurement, Bars (materials), Bend testing, Certification (approval), Chemical composition, Compositional tolerances, Concretes, Dimensional tolerances, Dimensions, Elongation, Fatigue testing, Grades (quality), Inspection, Marking, Mass, Performance testing, Preferred sizes, Pull-out tests, Quality control, Reinforced concrete, Reinforcing materials, Reinforcing steels, Reverse-bend tests, Sampling methods, Size, Specimen preparation, Statistical quality control, Steels, Structural steels, Tensile strength, Tensile testing, Test equipment, Unalloyed steels, Verification, Weldability
Posted by admin on June 26, 2009 · Leave a Comment
DD CEN/TS 13388:2008
Copper and copper alloys. Compendium of compositions and products
AVAILABILITY: yes
FORMAT: 64 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 59456 4
Filed under Copper and copper alloys · Tagged with Castings, Chemical composition, Classification systems, Compositional tolerances, Copper, Copper alloys, Designations, Filler metal, Ingots, Metal scrap, Non-ferrous alloys, Wrought alloys
Posted by admin on June 26, 2009 · Leave a Comment
08/30187561 DC
BS EN 10028-4. Flat products made of steels for pressure purposes. Part 4. Nickel alloy steels with specified low temperature properties
AVAILABILITY: yes
FORMAT: 14 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN:
Filed under Steels for pressure purposes · Tagged with Alloy steels, Chemical composition, Compositional tolerances, Elongation at fracture, Heat treatment, Impact strength, Low temperatures, Mechanical properties of materials, Nickel steels, Pressure equipment, Sheet materials, Steels, Tensile strength, Thickness, Yield strength
Posted by admin on June 26, 2009 · Leave a Comment
BS EN 10120:2008
Steel sheet and strip for welded gas cylinders
AVAILABILITY: yes
FORMAT: 14 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 59269 0
Filed under Steels for pressure purposes · Tagged with Approval testing, Chemical composition, Compositional tolerances, Delivery, Elongation at fracture, Gas cylinders, Heat treatment, Hot-working, Inspection, Marking, Purchasing, Rolling, Sheet materials, Steels, Strips, Tensile strength, Test specimens, Thickness, Welding, Yield strength
Posted by admin on June 26, 2009 · Leave a Comment
08/30185760 DC
BS EN 615. Fire protection. Fire extinguishing media. Specifications for powders (other than class D powders)
AVAILABILITY: yes
FORMAT: 34 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN:
Filed under Fire-fighting · Tagged with Agglomeration, Bulk density, Compositional tolerances, Density measurement, Fire extinguishers, Firefighting equipment, Flow measurement, Flow rates, Grades (quality), Marking, Particle size measurement, Particulate materials, Performance, Performance testing, Powder fire extinguishers, Sampling methods, Screening (sizing), Test equipment, Testing conditions, Tolerances (measurement), Water content determination, Water-absorption tests
Next Page »
