Posted by admin on June 26, 2009 · Leave a Comment
09/30143423 DC
BS EN ISO 11120. Gas cylinders. Refillable seamless steel tubes of water capacity between 150 l and 3000 l. Design construction and testing
AVAILABILITY: yes
FORMAT: 45 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN:
Filed under Gas cylinders, Pressure vessels · Tagged with Assembling, Calibration, Certificates of conformity, Chemical composition, Compositional tolerances, Compressed gases, Control samples, Dangerous materials, Design, Dimensional measurement, Environment (working), Formulae (mathematics), Gas cylinders, Hardness testing, Heat treatment, Hydraulic tests, Impact testing, Inspection, Liquefied gases, Marking, Mechanical properties of materials, Mechanical testing, Penetrant flaw detection, Performance testing, Pressure vessels, Quality assurance, Re-usable, Seamless pipes, Stainless steels, Surface defects, Tensile strength, Tensile testing, Thickness, Ultrasonic testing, Visual inspection (testing), Volume
Posted by admin on June 26, 2009 · Leave a Comment
BS EN ISO 3452-5:2008
Non-destructive testing. Penetrant testing. Penetrant testing at temperatures higher than 50 degrees C
AVAILABILITY: yes
FORMAT: 14 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 57159 6
Filed under Non-destructive testing · Tagged with Acceptance (approval), Blocks, Classification systems, Control samples, High temperatures, Non-destructive testing, Penetrant flaw detection, Penetrants, Qualification approval, Safety measures, Temperature, Test specimens, Visual inspection (testing)
Posted by admin on June 26, 2009 · Leave a Comment
BS EN ISO 3452-5:2008
Non-destructive testing. Penetrant testing. Penetrant testing at temperatures higher than 50 degrees C
AVAILABILITY: yes
FORMAT: 14 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 57159 6
Filed under Non-destructive testing · Tagged with Acceptance (approval), Blocks, Classification systems, Control samples, High temperatures, Non-destructive testing, Penetrant flaw detection, Penetrants, Qualification approval, Safety measures, Temperature, Test specimens, Visual inspection (testing)
Posted by admin on June 26, 2009 · Leave a Comment
BS EN ISO 3452-6:2008
Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10 degrees C
AVAILABILITY: yes
FORMAT: 12 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 57160 2
Filed under Non-destructive testing · Tagged with Acceptance (approval), Blocks, Control samples, Low temperatures, Non-destructive testing, Penetrant flaw detection, Penetrants, Qualification approval, Safety measures, Temperature, Test specimens, Visual inspection (testing)
Posted by admin on June 26, 2009 · Leave a Comment
BS EN ISO 3452-6:2008
Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10 degrees C
AVAILABILITY: yes
FORMAT: 12 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 57160 2
Filed under Non-destructive testing · Tagged with Acceptance (approval), Blocks, Control samples, Low temperatures, Non-destructive testing, Penetrant flaw detection, Penetrants, Qualification approval, Safety measures, Temperature, Test specimens, Visual inspection (testing)
Posted by admin on June 26, 2009 · Leave a Comment
BS EN ISO 11463:2008
Corrosion of metals and alloys. Evaluation of pitting corrosion
AVAILABILITY: yes
FORMAT: 18 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 978 0 580 60534 5
Filed under Corrosion of metals · Tagged with Alloys, Corrosion, Corrosion tests, Defects, Depth measurement, Dimensional measurement, Eddy-current tests, Identification methods, Inspection, Machining tolerances, Mechanical properties of materials, Metallography, Metals, Microscopic analysis, Non-destructive testing, Penetrant flaw detection, Pitting corrosion, Radiographic testing, Ratings, Replica techniques, Reproducibility, Statistical methods of analysis, Ultrasonic testing, Visual inspection (testing)
Posted by admin on June 26, 2009 · Leave a Comment
08/30140122 DC
BS EN ISO 12706. Non-destructive testing. Vocabulary of terms used in penetrant testing
AVAILABILITY: yes
FORMAT: 24 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN:
Posted by admin on June 26, 2009 · Leave a Comment
BS EN 623-1:2006
Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of the presence of defects by dye penetration
AVAILABILITY: yes
FORMAT: 10 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 0 580 48647 8
Filed under Advanced ceramics · Tagged with Ceramics, Defects, Dyes, Flaw detection, Non-destructive testing, Penetrant flaw detection, Reports, Special ceramics, Specimen preparation, Test equipment, Test specimens
Posted by admin on June 25, 2009 · Leave a Comment
PD CEN ISO/TR 25107:2006
Non-destructive testing. Guidelines for NDT training syllabuses
AVAILABILITY: yes
FORMAT: 92 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 0 580 47172 1
Filed under Non-destructive testing · Tagged with Acoustic measurement, Acoustic testing, Certification (approval), Courses, Eddy-current tests, Examination (education), Leak tests, Magnetic-particle flaw detection, Non-destructive testing, Penetrant flaw detection, Radiographic testing, Radiography, Teaching, Training, Ultrasonic testing, Visual inspection (testing)
Posted by admin on June 25, 2009 · Leave a Comment
BS EN 12062:1998
Non-destructive examination of welds. General rules for metallic materials
AVAILABILITY: yes
FORMAT: 18 pages, A4
DELIVERY OPTIONS: Immediate download, next working day or UK standard delivery
ISBN: 0 580 28699 1
Filed under Welded joints and welds · Tagged with Acceptance (approval), Acceptance inspection, Aluminium, Classification systems, Copper, Copper alloys, Defects, Eddy-current tests, Examination (quality assurance), Joints, Magnetic-particle flaw detection, Metals, Nickel, Nickel alloys, Non-destructive testing, Penetrant flaw detection, Quality control, Radiographic testing, Sampling methods, Selection, Steels, Technical documents, Thickness, Titanium, Ultrasonic testing, Visual inspection (testing), Welded joints, Welding
Next Page »
